(2) RESOLUTION: THE HIGHEST RESOLUTION:
(3) Stability of Indicating Values:
It is smaller than Δ/6 in a short period (10 minutes) and smaller than Δ/4 in a long period (8
hours).
Notes:
1) The stability of indicating values means the fluctuation range of indicating values at a stable
input, and is defined as a half of the value the maximum value minus the minimum value (i.e. a
half of P-P value). The stability of indicating values is associated with the input signal
magnitude, S_rAtE value and FILt value.
2) Measurement condition: the instrument is placed in the environment with
7 stable temperature and humidity for 1 hour, waiting 5 minutes after start-up,
S_rAtE=1, FILt=1, MAN compensation mode adopted for thermocouple, and
80%FS stable signals as input
PAGE -07