CHANGE PASSWORD
Switch on the gauge & immediately Press the
Password ‘00000’ (factory set password) is
Press enter key, the gauge will enter
’CALI’ is displayed
Press ‘Up’ key when ‘CALI’ is displayed.
’PASC’ will be displayed
Press enter when the above is displayed.
’nEuPS’ is displayed as follows.
FnS key.
displayed.
calibration mode
Press enter when the above is displayed.
Enter the new password using shift & up keys.
Press enter.
Display will return to ‘PASC’ display.
Press Fns key to return the gauge to normal operation.
