FIGURE 8
Focus Model
15
14
Basic Model
decrease the number of beeps you hear. So, by pressing the upper or
lower rocker switch, you can determine which setting is your preferred
Listening preference. You may take as long as you want to set TuneAmp.
Once you’ve determined which preference you desire,
press and
HOLD
the upper or lower switch for ten seconds, until you hear a long
beep. You have now locked in your Listening preference.
Congratulations! Your TuneAmp Basic is now fully configured
,
and the volume control is now active. From this point forward, the rocker
switch acts as a volume control.
To increase volume: tap the upper portion of the rocker switch.
To decrease volume: tap the lower portion of the rocker switch.
If you decide later that you want to reset your TuneAmp to a different
Listening preference, see page 18.
TuneAmp Focus
(For Basic model, see page 13)
Selecting Your Listening Preference
With a fresh battery in your TuneAmp and wearing the TuneAmp, you
are ready to select your desired Listening preference. The first time you
turn TuneAmp on, it will be at Listening preference One.
In a quiet environment, place your index
finger on the upper part of the rocker switch
(FIguRe 8)
,
press and release the switch
. You
will hear two beeps, indicating you are now
in Listening preference Two.
What you are doing is sampling the
available acoustic settings for quiet
environments. This may be continued for
up to 4 beeps.
The rocker switch also works in reverse. By
placing your finger on the lower portion
TuneAmp FOCUS
SET-UP
TuneAmp BASIC
SET-UP
(continued)
UPPER PORTION
LOWER PORTION
ROCKER
SWITCH
