FIGURE 5
FIGURE 4
Preparing for Use
11
10
Turning On/Off
Turning On/Off
To operate TuneAmp, a battery must be inserted in the battery
compartment. Close the battery compartment. Your TuneAmp is now
powered on.
To turn TuneAmp off, do the opposite–open the battery door part way.
(FIguRe 1, pg. 8)
When not in use, open the battery door part way. This helps to prevent
excessive battery drain and allows for proper ventilation of the pSAp.
Preparing for Use
TuneAmp comes standard with two common size tubes (left and right)
and two tips (sleeve and vented dome) that will fit most users. However,
if you need a different size, other tube lengths and tips sizes are
available through your retailer.
Connecting A New Tube
each tube is color-coded
(FIguRe 4)
to easily identify left and right (blue for
the left ear; red for the right ear.) Align the tube connector end with the
end of the pSAp case, then
push the tube straight onto the sound post
until it snaps into place
.
(FIguRe 5)
There is no need to rotate the tube
when attaching.
Text represents size
of tube. Color of text
indicates left or right.
