Tundra TUNENGCRALEV, Руководство пользователя

Страница: 3 / 8

3
USER MANUAL
TUNENGCRALEV
1. SAFETY GUIDELINES
Important: Read and understand all safety instructions before use. Keep instructions safe for future reference. Ensure that this
equipment is in sound, clean condition and good working order before use. This equipment is designed for lifting only - not for
supporting the lifting load.
•
Always inspect equipment for damage before use.
•
Ensure any damaged parts are replaced before use - use only Tundra Industrial recommended parts - contact your dealer for
advice. Do not use this equipment if damage or weakness is detected during inspection.
•
Do not modify this equipment for any use other than that which it has been designed and tested for.
•
Never exceed the rated capacity (safe working load = 680kg ).
•
Keep the equipment clean and well maintained for optimal, safe performance.
•
Ensure that the working environment is well lit and kept clean and free from clutter, keep children and animals away.
•
This equipment should only be used by fully-trained and competent individuals (never under the influence of drugs or alcohol).
•
Ensure load sling(s) are fully engaged in their karabiners and that the screw locks are securely closed.
•
Raise and lower the load in a smooth, controlled manner.
•
Use a qualified person to lubricate and maintain this equipment
•
Never shock the load leveller by allowing the attached load to fall freely, even for very short distances.
•
Never use the leveller to drag a load across the floor. Always position the load directly below the leveller.
•
Store leveller in a dry, childproof area when not in use
WARNING: NEVER ALLOW ANYONE TO STAND, OR PASS, BENEATH THE RAISED LOAD .
2. DESCRIPTION
• 680kg lifting capacity provides enough power to level a variety of car, van, truck and marine engines
• Supplied with 4x 275mm chains and 4x “L” shaped brackets
• All-steel construction ensures strength and durability
• Worm drive-shaft rotates with a built-in swivel ball-bearing handle for easy load balancing & fine adjustments
• Includes 3x adjustable chain holes to accommodate different engine sizes
• Sling span 340mm
WARNING:
No responsibility is accepted for incorrect use of this equipment. Incorrect use can result in damage to the equipment and
danger to the user. Warranty will be void in the event of incorrect use. The warnings, cautions and instructions discussed
in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.