SAFETY - WARNING
This UPS utilizes voltages that may be hazardous.
Do not attempt to disassemble the unit. The unit
contains no user serviceable parts. Only factory
service personnel may perform repairs.
Internal battery voltage is 12Vdc. Sealed, lead-acid,
6 cells battery. Connection to any other type of
receptacle other than a two-pole, three-wire
grounded receptacle may result in shock hazard as
well as violate local electrical codes.
In the event of an emergency, press the Smart
On/Off Button for 4 seconds and disconnect the
power cord from the AC power supply to properly
disable the UPS.
Do not allow liquids or any foreign object to enter
the UPS. Do not place beverages or any other
liquid-containing vessels on or near the unit.
This unit intended for installationina controlled
environment (temperature controlled, indoor area
free of conductive contaminants). Avoid installing
the UPS in locations where there is standing or
running water, or excessive humidity.
Do not plug the UPS input into its own output.
Do not attach a power strip or surge suppressor to
the UPS.
Do not attach to non-computer-related items, such
as medical equipment, life-support equipment,
microwave ovens, vacuum cleaners, lazer printers or
washing machine.
To reduce the risk of overheating the UPS, do not
cover the UPS
cooling vents and avoid exposing the unit to direct
sunlight or installing the unit near heat emitting
appliances such as space heaters or furnaces.
Unplug the UPS prior to cleaning and do not use
liquid or spray detergent.
Do not dispose of batteries in a fire as they may
explode.
Do not open or mutilate the battery or batteries.
Released electrolyte is harmful to the skin and eyes.
lt may be toxic.
Attention, hazardous through electric shock. Also
with disconnection of this unit from the mains,
hazardous voltage still may be accessible through
supply from battery. The battery supply should be
therefore disconnected in the plus and minus pole
of the battery when maintenance or service work
inside the UPS is necessary.
Servicing of batteries should be performed by
authorized personnel. Keep unauthorized personnel
away from batteries.
A battery can present a risk of electrical shock and
high short circuit current. The following
precautions should be observed when working on
batteries:
1) Remove watches, rings, or other metal objects
from the hands.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of
batteries.
5) Disconnect charging source prior to connecting
or disconnecting batteries terminals.
When replacing batteries, replace with the same
number and type of sealed lead-acid battery. The
maximum ambient temperature raling is 40˚C.
This pluggable type A equipment with battery
already installed by the supplier is operatar
installable and may be operated by laymen.
During the installation of this equipment it should be
assured that the sum of the leakage currents of the
UPS and the connected loads does not exceed 3.5
mA.
The mains socket outlet that supplies the UPS
shall be installed near the UPS and shall be easily
accessible.
