Tumo-Int 3000W 5 Blades Wind Turbine, Руководство пользователя

Страница: 14 / 22

13
AC110V/60Hz inverter, the capacity should be determined according to maximum
electricity load.
6.3 Battery
There are many battery choices available –lead acid, absorbed glass mat (AGM), gel cell
and NiCad. The type of battery utilized will depend largely on the battery bank location
and cost. For battery installations where fumes can be safely ventilated and the potential
for acid leakage accommodated, the lead-acid battery is typically the most economical
choice.
200AH/12V batteries are recommended for Tumo-Int 2000W and Tumo-Int 3000W wind
turbine owners. Negative pole of the battery should be in a good grounding. The capacity
must be based on electricity load of the owners.
6.4 Solar Panel
The common solar panel models for wind and solar hybrid system have the
following standard:
Power
（
W) Voltage
（
Vdc
）
Power
（
W) Voltage
（
Vdc
）
60w 12 24 140w 12 24
75w 12 24 150w 12 24
80w 12 24 180w 12 24
100w 12 24 240w 12 24
120w 12 24 Remark: voltage is calculated by
battery voltage.
The capacity should be designed in accordance with wind turbine and local wind and
sun resources.
6.5 Wire Size
All electrical systems lose energy due to resistance in conductors: the wires.
Large wires have less resistance but can be considerably more costly. Resistance
losses will also increase with increasing current; therefore, if yours is a high wind site,
it may be worthwhile to go with a larger size wire to take advantage of the greater
power production potential of your site. Conversely, in low wind sites it may not be
cost effective to increase the wire size since power production will be low.
For selection of wire size, the following factors should be taken into consideration:
①
Measuring the distance from the batteries to your Tumo-Int wind turbine. Be sure
to include height of the tower;
② Your system voltage;