To reduce the risk of fire or electric shock, do not expose the
to rain or moisture while charging. The
should not be exposed to dripping
or splashing, and objects filled with liquids, such as vases, should
not be placed on or near it while being charged or charging other
devices. As with any electronic products, use care not to spill liquids
into any part of the product. Liquids can cause a failure and/or a
fire hazard. The power supply must be used indoors only. Make
no modifications to the product or accessories. Unauthorized
alterations may compromise safety, regulatory compliance, and
system performance, and will void the warranty. Do not place any
flame sources, such as lighted candles, on or near the
parts that may be a choking hazard and is not suitable for children
under age 3. Do not continue charging the battery if it does not
reach full charge within the specified charging time. Overcharging
may cause the battery to become hot, rupture, or ignite. If you see
any heat deformation or leakage, properly dispose of the battery. Do
not attempt to charge the battery in temperatures outside the range
of 32°-104°F (0°-40°C). If the battery begins to leak, do not allow the
liquid to come in contact with your skin or eyes. If contact has been
made, wash the affected area with plenty of water and seek medical
attention immediately. Do not expose the product or battery to
excessive heat, including direct sunlight or fire and storage or use
inside cars in hot weather, where it can be exposed to temperatures
in excess of 115°F (60°C). Doing so may cause the battery and power
supply to generate heat, rupture, or ignite. Using the product in this
manner also may result in a loss of performance and a shortened life
expectancy. Extended exposure to direct sunlight may damage the
external appearance and material qualities. Do not step on, throw,
or drop batteries or the power supply or device, or expose them to
a strong shock. Do not pierce, crush, dent, or deform the batteries
or power supply in any way. If either becomes deformed, properly
dispose of it. Do not short-circuit batteries. Do not attempt to service
the
yourself. Opening or removing
covers may expose you to dangerous voltages or other hazards
and will void the manufacturer’s warranty. To prevent risk of fire or
electric shock, avoid overloading wall outlets, extension cords, or
integral convenience receptacles. Your Bluetooth device (mobile
phone, music player, tablet, laptop, etc.) must support the A2DP
Bluetooth profile in order to work wirelessly with your new
. The A2DP profile is supported by most recent
mobile products with built-in Bluetooth capability. Please refer to
your device’s user manual for details and instruction regarding the
Bluetooth profiles it supports.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:—Reorient or relocate the receiving antenna. —Increase
WARNINGS, CAUTIONS & LEGAL INFORMATION
TWS Earbuds
TWS Earbuds
TWS Earbuds