Mounting hole
Spirit level
05
Screw
Ø4×25mm
Place the 2-way duct into the installation
hole.
Make sure that the
“
UP
”
pattern on the
duct's wall bracket is facing up.
After using a leveling rod to make sure that
the 2-way duct is in a horizontal situation,
push the 2-way duct into the very end of
the hole.
3-1
3-2
3-3
3
Take out the unit wall bracket of the
appliance unit, align it with the screw holes
that have been drilled following Step 2,
and then fasten the unit with screws.
4-1
4
Take out the hanging rod, and then lock
two mounting frames onto the hanging
rod.
The average bearable weight to the hanging
rod is 10 Kg.
Attention
5-1
5
Lock the hanging rod, which has been set
up pursuant to Step 5, onto the appliance
unit.
6-1
6
Screw
Ø4×8mm
Hanging rod
Mointing frame
Screw Ø3×5mm
Gray rubber plugs
Unit
Wall bracket