04
INSTALLATIONS
Remove the wall bracket inside the unit kits.
Use a leveling rod, to mark 1 installation
hole and 4 holes for screws on the wall,
according to the illustrations of installation
requirements.
Install the unit around a wall socket or use
an extension cord, if necessary.
150cm
25cm
25cm
25cm
The installation hole shall not be drilled on
any wall that may be hazardous to building
structure, including any beam, pillar,
load-bearing wall, etc. Keep away from the
electrical wires embedded in the walls.
No obstacles should be within the
surrounding area 25cm away from the
appliance unit. The appliance unit shall be
at a height more than 150 cm above the
floor level.
We recommend that this appliance
installation shall near the wall of the
balcony or window in case of further
installation and maintenance.
a.
b.
c.
Attention
Pick the wall bracket and aim at the
mounting hole.
Use a wall drilling tool to drill a hole of
Ø160mm on the wall where the
installation hole is marked. At the marked
points for the screw holes, drill the
reaming holes of 6mm in diameter, over
30mm in depth.
Insert a plastic screw anchor into each
screw hole.
Ground
Mounting hole
Mounting hole
White plastic anchor
Ø7.5×25mm
a.
b.
WALL
WALL
Attention
If the drilling position is around area, please
consult the professional technician to see if
any other reinforcement work is required,
such as waterproofing.
Spirit level
1
2-1
2-2
2-3
2
1-1
1-2
1-3
The direction of drilling shall be vertical to
the wall.