Tugicom TX190 Скачать руководство пользователя страница 2

Package Contents

1x TX190 main board
1x PCB panel LCD module
1x RDS cable

      

Fast operation 

It is strongly recommended to read the entire user manual before operation, however, for quick setup, 

do not touch factory default jumper setting and refer to "OPERATING THE TX190" section.

TX190  -  Professional FM Exciter

TX190 is a state of the art FM exciter designed to be the core of every radio station.
Achieving perfect audio quality was our main goal, which means that no matter if your FM 
station is 1W or 10kW, no compromise should be when dealing with audio quality.

directed to use the most modern and advanced technology in the market while keeping 

The result is even more impressive than planned.
On a compact board, with over 95% Surface mount technology (SMT) to improve performance, an excellent 1W exciter with a 
modern PLL and fully digital control with LCD display.
Audio input chain designed perfectly beginning with a shielded XLR balanced input connector to cancel any interference from 
noisy RF environment.

RDS (Radio Data System) is today a standard module in every radio station, a complete RDS module has been integrated inside 
the TX190 including all main features of expensive professional stand alone RDS external modules.

The improved Stereo encoder, use a DSP technology with over sampling, to ensure excellent performance staring from low 
distortion, accurate channel separation and stable pilot tone, 
An external MPX generator, external RDS/SCA generator or audio processor can be connected to the MPX IN BNC connector to 
bypass all internal audio chain.

stage Low Pass Filter (LPF) already connected and tuned for maximum performance without any need for user tuning.

With emphasis of 24/7 operation without any malfunction, we are sure, that our TX190 will bring new audio quality for 
many thousands audiences all over the world.

Содержание TX190









Отзывы: