
1
SAFETY PRECAUTIONS
For safe operation of the weighing indicator, please
follow these instructions:
● Calibration inspection and maintenance of the indicator are
prohibited by non-professional staff
● Please ensure that the indicator rests on a stable surface
● The indicator is a piece of static sensitive equipment; Please
cut off power during electrical connections
● Touching the internal components by hand is prohibited
● DO NOT exceed the rated load limit of the unit
● DO NOT step on the unit
● DO NOT jump on the scale
● DO NOT use this product if any of the components are
cracked
● DO NOT use for purposes other than weight taking
● To avoid damaging the battery do not keep charger plugged
in once battery is fully charged
● Make sure the weight is not over the max capacity as it could
damage the load cell inside
● Material that has a static electric charge could influence the
weighing. Discharge the static electricity of the samples, if
possible. Another solution to the problem is to wipe both
sides of the pan and the top of the case with an anti-static
agent
Please take anti-static prevention measures
Any accumulated charge on the body of the human operator
should be discharged first before opening the protective contain-
er with ESDS devices inside. The discharge can be accomplished
by:
● Putting a hand on a grounded surface or, ideally, by wearing
a grounded Anti-static Wrist Strap and an Anti-static Mat
PREPARATION & SET UP
● Plug into a wall outlet to avoid interference with other wirings
● Turn on the indicator while there is no load
● Calibration may be required before weighing when the scale
is initially installed or moved from a location
Содержание T918M
Страница 1: ...T918M User Manual motorized pallet jack scale www tufner com...
Страница 5: ...3 SPECIFICATIONS...