Tufner 8000 REPEL, Руководство пользователя

Страница: 4 / 19

8000 REPEL
Digital Weight Indicator User Manual
4
2 BASIC OPERATION
2.1 Getting Started – Cabled Systems
1. Press and hold the ON key on the digital indicator unit for two seconds.
After a brief initialization period, the scale will revert to a zero (“ 0 ”) weight dis-
play.
Your scale is now ready for operation!
2.2 Getting Started – Wireless Systems
1. Switch on the TI-500RFTM weighing module(s) by pressing the BLUE button
once . The blue LED will turn solid for a few seconds and then start to flash.
2. Next press and hold the ON key on the digital indicator unit for two seconds.
After a brief initialization period, the scale will revert to a zero (“0”) weight dis-
play.
Your wireless scale is now ready for operation!
2.3 Operation –
8000 REPEL
Before weighing it is necessary to check if the scale is unloaded and indicating zero
weight in the desired unit of measure, for example lb for pounds.
If the indicator is not displaying the desired unit of measure, press the UNITS key a few
times until it is indicated, e.g. lb for pounds, kg for kilograms, etc.
The indicator features an automatic zero correction meaning that small deviations will
be zeroed automatically. If the indicator does not automatically determine the zero
point, please press the ZERO key once briefly.
2.4 Operation – TI-500 RFTM
The TI-500 RFTM contains two buttons and one LED.
•
The BLUE button is used to power up the RF weighing module
•
The RED button is used to immediately power down the RF weighing module
The TI-500 RFTM has several operating modes to save battery life and also to alert the
user when
it’s time to replace the batteries. You can determine the operating mode by
observing the blinking behavior of the blue LED: