Tufline BCP1816, Руководство оператора, Страница: 14 / 38

Dealer Checklist
(Dealer’s Responsibility)
Inspect the equipment thoroughly after assem-
bly to be certain it is set up properly before
delivering it to the customer. The following
check list is a reminder of points to inspect.
Check off each item if it is found satisfactory or
after proper adjustment is made.
____ Check that all safety decals are installed
and in good condition. Replace if damaged.
____ Check all bolts to be sure they are tight.
____ Check that all cotter pins and safety pins
are properly installed.
____It is important for the dealer to visually
check and make sure all parts are intact prior to
delivery to customer.
____ Show customer the safe, proper proce-
dures to be used when mounting, dismounting,
and storing equipment.
____ For mounted units, add ballast in front
tires, and/or front tractor weight to enhance front
end stability. A minimum 20% of tractor and
equipment gross weight must be on front tractor
wheels. When adding weight to attain 20% of
tractor and equipment weight on front tractor
wheels, you must not exceed the ROPS weight
certification. Weigh the tractor and equipment.
Do not estimate!
11 Dealer Instructions
____ Show customer how to make adjustments.
____ Present Owner’s/Operator’s Manual and
request that customer and all operators read it
before operating equipment. Point out the man-
ual safety rules, explain their meanings and
emphasize the increased safety hazards that
exist when safety rules are not followed.
____ Point out the safety decals. Explain their
meaning and the need to keep them in place
and in good condition. Emphasize the increased
safety hazards when instructions are not fol-
lowed.
____ Explain to customer the potential crushing
hazards of going underneath raised equipment.
Instruct customer that service work does not
require going underneath unit and never to do
so.
____ Complete the Warranty Registration
located on the Tufline website.