Chapter 3: Setting Up The T-800/1200
Power up and Connect to the Network
Note:
The appliances have a predefined IP address. Before racking the appliances, make sure to change the IP address either
in the first-time wizard (as described
Chapter 4: Configure SecureTrack
), or using a console connection (see
) in CLI. For CLI instructions, see
https://forum.tufin.com/support/kc/latest/Content/Suite/1584.htm
To power up the appliance and connect it to the network:
1.
Connect the power cable.
2.
Boot up the appliance by pressing the Power button on the front panel.
3.
Connect a network cable to the ethernet port 1 (Chapter 2: Rear Panel, item C) and to a PC (with a crossover cable), or to a local network
that is in the same subnet as the
eth0
port. If you have not changed it, the default is
192.168.1.100/24
.
Advanced CLI Configuration
You can achieve CLI access using a console connection or SSH access. To use a console connection, configure the terminal to match the
following appliance console port settings:
l
57600 bits per second
l
8 Data bits
l
Parity: None
l
Stop bit: 1
l
Flow Control: None
T-800/1200 Quick Start Guide
Chapter 3: Setting Up The T-800/1200
Copyright 2003-2021, Tufin Software Technologies Ltd.
7
Содержание T-1200
Страница 1: ...T 800 1200 Quick Start Guide Version 13 11...
