Page 10
Solid Plastic Tufftec 2.0 Locker Installation Instructions
Section 6: Lockers Continued
Setting and Attaching Lockers Continued:
Locate the next bank of lockers to be installed. Place this bank into position next
to the first bank installed. Locate the pre-drilled holes on the side of the face
frame. You will join the second bank to the first bank using the 7/8" torx head
thru-bolts (T-30) provided, join the banks together, being careful not to over
tighten the screws at this time.
Locate the next banks required and continue joining them together. once you
have several banks joined together, you can go back and attach these to the
walls. Attach to the wall at the first frame on the right side of each bank.
Note:
If shimming is required place shims where frames
meet. Do NoT shim directly under the door, this may cause
improper functioning of the door.
