TG
- 11L Leg Press
A
bout the Leg Press (TG-11L)
Congratulations on your new purchase of the Leg Press (TG-11L) . We
hope you are completely satisfied with this product and wish you many
years of enjoyment.
T
uff Stuff Equipment
Every Tuffstuff product has been built to precise quality standards and
has been carefully packaged to ensure that damage will not occur during
shipment. The limited lifetime warranty and signature indicating final
inspection has been conducted by our line foreman, is an expression of our
confidence in the completeness, the materials, and workmanship of this
product.
W
arranty
SEE WARRANTY REGISTRATION CARD
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that a
permanent record of your purchase is on file with our f actory, be sure to
complete the warranty registration card and send it to Task Industries today.
S
afety Information
1)
Familiarize yourself and others with the proper operation and workout
recommendations for each piece of Tuff Stuff equipment prior to use.
2)
Consult with your physician before beginning any exercise program.
3)
Use proper discretion when children are present.
4)
Inspect machine for any sign of parts or hardware becoming loose.
5)
Periodically check the cable for any indication of wear.
6)
Keep hands and limbs clear from weight stack and all
other moving parts.
M
aintenance Information
1)
Lubrication of the axles is essential to the longevity and optimal
performance of your TG-11L Leg Press. We recommend a multi-purpose
grease for this application.
2)
All cables and bushings should be checked regularly for signs of wear.
3)
Periodically check all moving parts, upholstery and grips for wear. If
replacement is necessary, please contact your local Tuff Stuff retailer or call
our Customer Service Department.
4)
As needed, upholstery may be cleaned with a mild solution of soap and
water. Regular use of a vinyl treatment will add to the life and appearance of
your upholstery.
T
ool Requirements
1)
Two 3/4” Open-end wrenches
2)
Two 9/16” Open-end wrenches
3)
One rubber mallet hammer
4)
Multi- Purpose Grease
5)
Hex Key 3/16 (Supplied)
6)
Measuring tape
Hardware Measurement Diagram
Introduction
FIG. 2
Next, mount the
Back Pad (#6)
onto the
Adjustable Back
Pad Tube (#8)
and secure it into place using two Hex Head Cap
Screws 3/8-16 X 1 (#19) and two Flat Washers SAE 3/8 (#23). Next,
insert one Plastic Insert Cap 1 3/4 Sq. (#26) into the
Adjustable Back
Pad Tube (#8)
,
as shown above. Next, attach the
Seat Pad (#7)
to the
Main Frame (#2)
and secure it into place using two Hex Head Cap
Screws 3/8-16 X 1 (#19), one Hex Head Cap Screw 3/8-16 X 2 3/4
(#17-Labeled with arrow) and three Flat Washers SAE (#23). Next,
attach two Nylon Pulleys 4 1/2” Rd. (#30) into the front pulley bracket
of the
Main Frame (#2)
.
Secure them into place using one Hex Head
Cap Screw 3/8-16 X 2 3/4 (#17), two Flat Washers SAE 3/8 (#23) and
one Nylon Insert Jam Lock Nut 3/8-16 (#25). Next, mount the Rubber
Bumper (#27) onto the
Main Frame (#2)
and secure it into place using
one Hex Head Cap Screw 3/8-16 X 1 3/4 (#18),one Steel Washer 3/8
(#28) and one Flat Washer SAE 3/8 (#23).
1
FIG. 1
Start by mounting the
Stabilizer Support (#3)
onto the
Main
Frame (#2)
and secure it into place using two Hex Head Cap Screws 3/8-
16 X 3 3/4 (#15), four Flat Washers SAE 3/8 (#23) and two Nylon Insert
Jam Lock Nuts 3/8-16 (#25). Next, attach the
Handle Rt. (#33)
and the
Handle Lt. (#34)
to the
Main Frame (#2)
and secure them into place
using two Hex Head Cap Screw 3/8-16 X 3 1/4 (#35), four Flat Washers
SAE 3/8 (# 23) and two Regular Nylon Insert Lock Nut 3/8-16 (#36). Next,
insert two Hard Grips .875 X 8 (#37) over the tube ends of the
Handle Rt.
(#33)
and the
Handle Lt. (#34)
.
Note: It is recommended to use windex
or a household glass cleaner for easy insertion of the Hard
Grips .875 X 8 (#37) .
Next, insert one Plastic End Cap w/Groove 2 X 3
(#29) onto the tube end of the
Main Frame (#2).
1
TG-11L Leg Press (Option)
