manualshive.com logo in svg

TuffStuff SP-404, Руководство по сборке

Поделиться
Скачать
TuffStuff SP-404 Скачать руководство пользователя страница 2

4. Use proper discretion when children are present. 
 
5. Frayed or worn cables can be dangerous and may cause 

injury.    Periodically check these cables for any indication 
of wear.  

 

  

6. Keep hands, limbs, loose clothing and long hair well out of 

the way of moving parts. 

 
7. Do not attempt to lift more weight than you can control 

safely. 

 
8. Inspect the Unit for any sign of wear on parts, hardware 

becoming loose or cracks on welds.  If a problem is found, 

do not use or allow the machine to be used

 until the 

defective part is repaired or replaced. 

 

A

bout the Lat/Mid-Row SP-404 

Congratulations on your new purchase of the  Lat/Mid-Row.  
We hope you are completely satisfied with this product and 
wish you many years of enjoyment. 

T

uff Stuff Equipment 

This Tuffstuff product has been built to precise quality 
standards and has been carefully packaged to ensure that 
damage will not occur during shipment.    The limited lifetime 
warranty and signature indicating final inspection has been 
conducted by our line foreman, is an expression of our 
confidence in the completeness, the materials, and 
workmanship of this product. 

W

arranty 

SEE A COPY OF WARRANTY ON BACK PAGE 

R

egistration Card 

To avoid unnecessary delays in warranty service and to 
insure that a permanent record of your purchase is on file 
with our factory, be sure to complete the warranty 
registration card and send it to Task Industries today.

 

Introduction 

P

rior to the Assembly of the Lat/Mid-Row 

1. We advise you to consult your local Tuff Stuff retailer if 

you should have a question or problem regarding the 
proper assembly of this unit. 

  
2. Neatly organize and identify all parts according to the 

Parts List and the Exploded View Diagram. 

 

T

ool Requirements 

1. One 3/4” combination wrench 
2. One 9/16” combination wrench 
3. One 1/2” combination wrench 
4. One 7/16” combination wrench 
5. One ratchet 
6. One 9/16” socket 
7. One 3/4” socket 
8. One 7/16” socket 
9. Rubber mallet 

10. Windex or household glass cleaner 

11. One can silicone spray / teflon spray lubricant 

12. Measuring tape 
13. Utility knife 

S

pecifications

 

 

1. Maximum Wt. Capacity  

- 200 Lbs. 

2. Total Machine Weight  

- 555 Lbs. 

3. Footprint  (LWH) 

- See Front Page  

Note

: Due to continuing product improvements, specifications and designs are subject to change 

without notice. 

S

 

afety 

F

irst 

Regardless of how enthusiastic you may be about getting on 
your equipment and exercising, take the time to ensure  that 
your safety is not jeopardized.  A moment’s lack of attention 
can result in an accident, as can failure to observe certain 
safety precautions. 
   
1. Read, study and understand the Owner’s Manual and all 

the warning labels on this product.    Furthermore, it is 
recommended to familiarize yourself and others with the 
proper operation and workout recommendations for this 
Tuff Stuff product prior to use.   Some of this information 
can be obtained in this Owner’s Manual, as-well-as from 
your local Tuff Stuff retailer. 

  
2. It is imperative that you retain this Owner’s Manual and be 

sure all warning labels are legible and intact.  
Replacement of Owner’s Manuals and labels are available 
from your local Tuff Stuff retailer. 

 
3. Consult with your physician before beginning any exercise 

program. 

Safety Precautions 

1 

SP-404  Lat/Mid-Row 

Hardware Measurement Diagram 

SC

RE

W

 W

ID

TH

WASHER DIAMETER

NUT DIAMETER

SC

RE

W

 LE

NG

HT

Содержание SP-404

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды