TUFFCAT 2X1000 Скачать руководство пользователя страница 22

22

ACCESSORIES

Easy-to-read glycerine filled pressure gauge to permit pressure adjust-
ments to meet exact spraying or cleaning needs and to monitor system
performance.

2X1000, 3X1000, 3X1250 ..........................................................

6094

2X1500 .......................................................................................

6096

Adjustment collar over barb permits chemical and cleaning solution
application at operator selected intensity. Optional stainless steel con-
struction for extended life.

2X1000, 2X1500 ....................

7193

3X1000, 3X1250 ....................

7194

Adjustable pressure regulating Unloader permits the setting and maintain-
ing of system pressure from 100 to 1000 or 1500 for optimum perfor-
mance. Common to all models.

............................................

7500S

Molded insulated 12" lance extension allows quick coupling of gun to a
variety of standard and optional accessories.  .................................

33220

35 foot electrical cord featuring a Ground-Fault Circuit-Interrupter for pro-
tection and maximum safety during operation.

2X1000 (14 GA 15 Amp) ............................................

34520

2X1500, 3X1000 (12 GA 20 Amp) ............................................

34521

3X1250 (14 GA 20 Amp) ............................................

34522

30 foot high pressure hose with swivel and quick disconnect for ease in
operation and assembly. Common to all models.

Standard..............................

34374

Optional ...............................

34385

Hose-to-Hose Q.D...............

34380

3 foot clear plastic chemical hose easily slips over the chemical injector
barb to visually monitor chemical draw. With weighted filter (32631) to
hold chemical tube at bottom of supply container and prevent debris from
being drawn into injector.

............................................

34669

Lightweight Shut-Off gun with molded extension and quick coupling
allows easy assembly and quick changes to many optional accessories.
Common to all models.

....................................

33425.220

Adjustable Vari-Nozzle featuring low to high pressure, as well as 0

°

to 60

°

spray angle for chemical and cleaning flexibility with extension for quick
assembly.

2X1000 ..........................

7940.521

2X1500 ..........................

7930.521

3X1000 ..........................

7960.521

3X1250 ..........................

7950.521

Thermo Valve to minimize excessive liquid heat build-up while cleaning
system is in periodic by-pass mode. Common to all models.

...............................................

7140

Prevents chemicals or soap from flowing back into the supply line.
Standard on 2X1000 only.

............................................

34839

PRESSURE GAUGE

ADJUSTABLE
CHEMICAL
INJECTOR

UNLOADER

LANCE EXTENSION

ELECTRICAL CORD

HIGH PRESSURE HOSE

CHEMICAL HOSE

SHUT-OFF GUN

VARI-NOZZLE

THERMO VALVE

BACK FLOW
PREVENTER

STANDARD

0

500

1500

1000

0

500

1500

1000

2000

2500

3000

Содержание 2X1000

























Отзывы: