20
21
RHINO STAND UP PATIENT LIFTER P440 and P445
RHINO STAND UP PATIENT LIFTER P440 and P445
SECTION 4
LIFTING THE PATIENT
WARNING
DO NOT
exceed the maximum weight limit of
350 lbs.
DO NOT
attempt to transfer, the user must be
assessed by a qualified professional. Thoroughly
read and fully understand the instructions in this
Owner’s Manual.
ALWAYS
keep hands and fingers clear of moving
parts to avoid injury.
Individuals that use the stand-up patient sling MUST
be able to support their own weight, otherwise
injury may occur.
DO NOT
move the patient if the patient sling is not
properly connected to the attachment holders on
the lift arm. Check that the patient sling is properly
connected to the attachment holders BEFORE
lifting the patient.
During transfer, with the patient suspended in the
patient sling,
DO NOT
roll the base of the patient
lifter over any uneven surfaces that would cause the
patient lifter to become unstable.
ALWAYS
use the handle on the mast assembly to
move the stand up lifter to ensure the safety.
1
2
3
4
5
6
WARNING
The legs of the stand-up lifter
MUST
be in the
maximum open position for stability and safety.
POSITIONING THE STAND UP LIFTER
Press the “FOOT” – “OPEN”
button on the hand control to
open the legs to the maximum
open position.
1
Obtain stability.
Step down on right side of “Leg Adjusting Stepper” to open the
legs to the maximum open position.
P445
P440
Step down on right to OPEN
Maximum Open
Position is 30”
