![background image](http://html1.mh-extra.com/html/tuffcare/rhino-p420/rhino-p420_operating-manual_1179424007.webp)
- 11 -
ATTACH THE POWER BASE ACTUATOR TO THE MAST
ASSEMBLY( FOR P425 and P655)
1.
Locate the base actuator at
the space between the two
rear casters.
2.
Turn counter clockwise to
remove the knob and the 1st
small flat washer that was on
top of the actuator through
bolt.
3.
Install the bolt through the
hole in the mast. make sure
the 3 included washers are
lined up like the diagram.
4.
Place the small flat washer
onto the bolt.
5.
Follow by the threading the
knob onto the bolt.
5.
Turn clockwise to tighten the
bolt, if needed use the included
wench(17mm) to hold the other
side of the bolt while turning.
- 12 -