Part # 32906 fits 2013 - 2018 models
Part # 32907 fits 2019 - 2020 models
Part #
Description
Qty.
*32906-01
Sensor link rods (pair) 13 - 18
1
**32907-01
Sensor link rods (pair) 19 - 20
1
32902-01
Front strut spacer
2
D2PNB
Hardware
bag
1
32906INST
Instruction
manual
1
* - Included in the Part # 32906 only
** - Included in the Part # 32907 only
Congratulations on your selection to purchase a Tuff
Country EZ-Ride Suspension System. We at Tuff
Country EZ-Ride Suspension are proud to offer a high
quality product at the industries most competitive
pricing. Thank you for your confidence in us and our
product.
The Tuff Country EZ-Ride Suspension product safety
label that is included in your kit box must be installed
inside the cab in plain view of all occupants.
Make sure to use thread locker or loctite on all new and
stock hardware associated with the installation of this
suspension system.
After the completion of the installation, a front end
alignment is required.
IMPORTANT INFORMATION:
Due to the complexity of the Ram’s factory air ride sys-
tem, we highly recommend using only an experienced
suspension specialist for installation. Tuff Country
is not liable for any costs associated with problems
resulting from improper installation of this system.
All pressurized air suspension components contain
high pressure air (up to 220 psi). Extreme caution must
be used during the installation of this system to pre-
vent component damage or personal injury.
Failure to disable the air suspension system prior to
installation can result in excessive leakage from the
system and damage to the air compressor assembly.
Failure to prevent and check for leaks or restrictions
in the air line connections can result in damage to the
air system compressor, and set error codes, and lock
the ASCM. Only the RAM dealership has the ability to
access and reset the ASCM. The recharging of the sys-
Installation Manual
Ram 1500 4x4 front lift kit-
with ride height sensor links
Part # 32906 & 32907
SS11112020
tem may also be required as well as in depth diagnos-
tics and recalibration of the system to restore proper
function.
Please be aware that some Dodge Ram owners may
experience a vibration in the front end or a violent
shaking vibration of the front wheels when going over
a bump at certain speeds. This is due to the front dif-
ferential and suspension when Dodge Ram trucks are
in 4x4 mode. These two symptoms are often lumped
together and called a “steering ocsilation” however it
isactually two different problems with the Ram Truck.
The 4HI mode vibration is a vibration or shudder that
occurs when accelerating in 4x4 high mode. This
symptom appears isolated to 1500 non-Mega Cab
model trucks and only when in 4-hi mode. Dodge
could not discover why their stock trucks would do
this for some customers and not others, so the final
official statement from Dodge was that there is no
problem and that all of the new Rams will shudder or
shake when in 4x4 high.
Therefore, after installing this kit on your Dodge Ram
truck, if you experience either of the two symptoms
mentioned above, Tuff Country recommends two
options. 1). Remove the kit from the vehicle and send
it back to the company you purchased it from for a full
refund or 2). Install High angle CV joints that will sta-
bilizethe factory vehicles issues.Important customer
information:
Important customer information:
Tuff Country EZ-Ride Suspension highly recommends
that a qualified or a certified mechanic performs this
installation.
It is the responsibility of the customer/installer to
wear safety glasses at all times when performing this
installation.
It is the customers/installers responsibility to read and
understand all steps before installation begins. If you
have any questions or concerns, please contact our
technical department @ (801) 280-2777. Also, the OEM
manual should be used as a reference guide.
This vehicles reaction and handling characteris-
