6. Precautions
CAUTION
Do not disassemble
Do not contact water
Do not subject the
camera to physical shock
Immediate repairrequest
Do not disassemble, repair or modify on your own.
Otherwise it will cause damage to the camera chip
or devices on the circuit board.
Avoid allowing the camera to get wet, since this may
cause the failures such as circuit board device
corrosion, burnout and so on.
Avoid physical impacts such as dropping or banging.
Unplug the data cable and the power supply
thenrequest TUCSEN to have the authorized dealer
or sales for repair.
Note: Man-made damage including self-disassembly, water ingress, physical shock and so
on is not within the scope of warranty.
！
-8-
③
File format: Support JPG \ TIF \ RAW \ AVI, default to TIF, and can be checked
simultaneously, but at least one of them must be chosen.
②
Image naming : A file will be saved with the name "Mosaic" as default, but
the name can be customized. "Customized name + time stamp" is supported.
A name can contain up to 64 bytes .
①
Save path Under default status, the image file shall be saved to a filefolder
specified in defined [ Path ]; user could modify save path through [ … ].
-7-
5.3
.
Image Taking
Note: 1)Select AVI for video storage, click Setting beside AVI to pop up a dialog
box to select compression format and video playback rate; 2) Dhyana 400DC
does not support RAW format.
④
]
There are two modes of saving files:
[To RAM Save the data into computer memory; after image capturing,write the data
into a disc file. Limited by the size of memory space, this mode is not suitable for
capturing images for a long time.
[To Disk]Instant reading and writing; in the process of capturing images,the function
will automatically write the data into disk. This is good for long-term shooting .
Image Capture
Path
:
Use Time-stamped
Capture
20171128_V1.7/image
Image Name
:
Mosaic
Total Frame
:
10
0
6
0
m
s
ms
0
6
0
m
s
ms
Total Time
:
Interval Time
:
File Format
Save as
JPG
TIF
AVI
Set
To Disk:
To RAM:
RAM...
...
√
RAW
①
②
③
④
