Tucker-Davis Technologies, Inc. RZ2, Руководство оператора

Страница: 4 / 9

2
Using the RZ2 Processor Device
This manual provides the directions necessary for powering the RZ2 High Performance Processor
on and off as well as its communications functionality and User Interface features. Refer to the
System 3 Manual provided by TDT for specific instructions on how to program the RZ2 Processor
device.
Applying Power to the RZ2
CAUTION! Allow at least 2 cm clearance from each side of the RZ2 chassis for proper
cooling. A ventilation fan is provided on the each side of the RZ2 chassis.
Installation of the RZ2 chassis with the ventilation obstructed may cause a
malfunction or fire.
Use only the supplied power cord.
To turn the RZ2 on:
1. Position the RZ2 chassis so that both the power switch and power cord may be accessed
easily.
2. Ensure that the power switch is off and connect the power cord.
3. Turn the power switch on and check that the power switch's blue LED is illuminated.
Disconnecting Power from the RZ2
CAUTION! When removing the power cord from either the power supply or socket
outlet, grasp the plug, not the cord, in order to avoid damaging the cable.
To disconnect the RZ2:
1. Turn off the power switch.
2. Disconnect the power cord from the power supply.
3. Disconnect the power cord from the wall socket plug.
The RZ2 Communications Interface
The RZ2's Optibit optical interface is integrated into the device and connectors are provided on the
back panel. The connectors on the fiber optic pair used for PC communication are color coded for
correct wiring.
CAUTION! The fiber-optic cables have raised keys on one side of the connector. There
are also keyway notches on the inside of the connector on the RZ2
communications interface module; to avoid damage to the interface and
cables, the fiber-optic cable should be oriented so that the keys on the cable
connectors line up with the keyway notches on the module.