TubeDepot 18 WATT, Инструкция по сборке

Страница: 15 / 71

Step 10 – At the opposite end of the twisted wire pair, strip back the insulation ¼” and tin
these two wires.
Step 11 – Solder these wires to the terminals of the speaker; the white wire to the “+” terminal
and the black wire to the “-” terminal (photo 4.3c).
Mounting the Speaker in the Cabinet (Combo Cabinet)
Step 1 – Remove the four speaker mounting screws
from the speaker baffle board.
Step 2 – With speaker in hand, carefully align the
speaker mounting holes to the baffle board mounting
holes (I recommend installing the speaker with
connecting terminals on top).
Step 3 – Install a single #8 flat washer on each of the
four mounting screws prior to installation.
Step 4 – Install the four mounting screws through the
speaker mounting holes into the baffle board. Firmly
tighten down.
4.4
TubeDepot.com 11
photo 4.4a
The combo kit can be ordered without a speaker leaving the choice of speaker up to you.
It is recommended that the power rating of the speaker is at least 35W.
NOTE
NOTE
The choice of stock speaker is determined by what we have on hand. This usually
alternates between either the Weber or Celestion speakers, both of which are excellent.