Tube Technology Fusion HB70, Руководство пользователя

Страница: 6 / 13

Audio
Connection
This chapter contains information on;
Connecting the Fusion HB70 Amplifier
Connect all Line-Level sources in any of the six inputs labelled (7) in the diagram
above. Connect your CD Player, Tape Deck, Tuner to the labelled inputs and any
other line-level sources such as mini-disc or AV outputs can be connected to
Aux1,Aux2 or Aux3.
If you have a Tape Deck or any other recording device connect its input to REC
OUT
(6) . The desired input selected on the front panel of of the HB70 can now be
recorded.
If you have other equipment such as a sub-woofer or slave amplifier which requires a
variable output from the Pre-Amp connect its input to PRE OUT
(5) .
Connect the Loudspeakers with either 4mm Banana Plugs or bare wire ends directly
in the binding posts
(4) Right Channel & (8) Left Channel for a single wire system.
If Bi-Wiring connect the Bass R,L at (4) & (8) , and the Treble R,L on (9) & (10) .
Ensure that the Red or + lead of the speaker cable connects to the + on the
Amplifier and that the Black or
-
of the speaker lead connects to the
-
on the
amplifier.
Connecting the
Inputs
Connecting the
Outputs
Your Amplifier uses high quality connectors to ensure that maximum signal transfer is
possible, therefore ensure that all cables used for connection to the amplifier are terminated
with connectors of similar quality.
Connecting the
Loudspeakers
Audio Connection - 6
Diagram 1