Tube-Line NITRO 275RS, Руководство оператора

Страница: 18 / 49

Nitro -
Section 4 - Safety 4-3
Never place any part of your body where it could be in danger if movement should occur during assembly,
installation, operation, maintenance, repairing, unplugging or moving.
Turn machine off, stop and disable engine, remove ignition key and place in your pocket and wait for all moving
parts to stop before servicing, adjusting, repairing, or unplugging.
Beware of the machine size and have enough space to allow for operation.
Do NOT use attachments unless attachments are approved optional equipment.
Do not exceed a safe traveling speed when transporting.
Always use extra caution when turning around corners or in tight areas.
If elderly people assist with work, their physical limitations need to be recognized and accommodated.
Use only in daylight or good artificial light.
DANGER: The upright beaters on the Nitro can maim or kill. Always check for bystanders before engaging the
PTO.
Tire Safety
DANGER: Failure to follow proper mounting procedures when mounting a tire on a wheel or rim can produce
an explosion which may result in serious injury or death.
•
Do not attempt to mount a tire unless you have the proper equipment and experience to do the job.
•
Have a qualified tire dealer or repair service perform required tire maintenance.
•
When replacing worn tires, make sure they meet the original tire specifications.
NOTE: Proper tire pressure and maximum load details can be found in Section 3 - Tire Load Index Charts .
Hydraulic Safety
1. Make sure that all components in the hydraulic system are kept in good condition and are clean.
2. Before applying pressure to the system, make sure that all components are tight, and that lines, hoses and
couplings are not damaged.
3.
Do not attempt any makeshift repairs to the hydraulic lines, fittings, or hoses by using tapes, clamps or
cements. The hydraulic system operates under extremely high pressure. Such repairs will fail suddenly and
create a hazardous and unsafe condition.