Tube-Line BF5000S, Руководство оператора

Страница: 20 / 42

6-3 Section 6: Maintenance - Stationary Balefeeder BF5000S
Complete all checks and services in this section at the hour interval shown.
NOTE: Failure to complete the required maintenance at intervals shown can cause unnecessary
downtime.
General checking of bolts, security pins and split pins must be carried out initially after the first 8
hours of use. Subsequently, check every 50 hours and whenever the machine is laid up for extended
periods.
WARNING
Before performing any adjustments or maintenance on the Tube-Line, observe these safety
precautions:
Turn off tractor, set parking brake, remove key and wait for all moving parts to stop before leaving
cab.
Read Maintenance Safety, pg.2-2 .
Failure to comply could result in death or serious injury.
Daily Maintenance
Careful inspection and service of the Bale Feeder prior to operation each day will prevent needless
breakdowns and delays in the field. Make the following checks and adjustments.
1. Be alert for loose hardware and tighten or replace as required.
2. Lubricate the BF5000S according to the instruction in the “Lubrication” section of this manual.
Preseason Service
Prior to beginning the harvest after offseason storage, take the following steps be certain the Tube-
line BF5000S is in good condition.
Check slot opening guide, make sure it is tight and that the beater blades are clear.
Refer to
Beater Guide, pg.4-2
.
Lubricate the Tube-line BF5000S according to
Grease Points, pg.6-1
.
Tighten or replace any damaged or missing fasteners.
End of Season Service
Prior to storing the Tube-line BF5000S during the off season, follow these steps to ensure easier
preparation for the next season and longer Tube-line BF5000S life.
• Pack all grease points with grease. Refer to Grease Points, pg.6-1 .
• Remove all crop material from the BF5000S.