Configuration Menu
The built in configuration menu can be used to set parameters such
as midi channels or the pedal note priority.
Accessing the config menu
1. Turn off your synthesizers
2. Press and hold an D-minor chord (D-F-A) anywhere on any
keyboard.
Note: Playing an E-minor chord starts the bootloader for
firmware updates instead.
3. Turn on the synthesizers
The following descriptions refer to the config menu graphic --->
Selecting the MIDI input channels
1. Press the key to select the channel group (PEDAL in,
LOWER in or UPPER in).
2. Press the lowest C to turn this channel off, or keys 1 – 16
(C#0 - E1) to select midi channel 1-16
Selecting the MIDI output channels
1. Press the key to select the channel group (PEDAL out,
LOWER out or UPPER out).
2. Press the lowest C to turn this channel off, or keys 1 – 16
(C#0 - E1) to select midi channel 1-16
Midi soft through
Press the THROUGH ON or OFF keys to turn midi soft through orn
or off.
Pedal note priority
Press keys LOWEST, LAST or HIGHEST to set the pedal note
priority accordingly
Gate dead time
Press the “Gate dead time” key (B1) and then use the lowest 17
keys to turn the feature OFF (C0) or adjust the dead time between 2
and 24ms.
factory
reset
SAVE &
EXIT
O
F
F
1
2
3
4
5
6
7
8
9
1
0
11
1
2
1
3
1
4
1
5
1
6
OUT
OUT
OUT
LAST
LOWEST
HIGHEST
Gate dead time
IN
OFF
ON
IN
IN
U
P
P
E
R
th
ro
u
g
h
L
O
W
E
R
M
ID
I
P
E
D
A
L
P
E
D
A
L
n
o
te
p
rio
rity
