Easi-Scope 2 User Guide
4
Installing Hardware Driver and Application
Plug your USB Receiver into your computer and wait for
the automatic Windows hardware installation to finish.
Insert the Installation CD into your optical drive and the
Easi-Scope 2 Installer should launch automatically. If
this doesn’t start, go to ―My Computer‖, select the CD
drive and double click on
setup.exe
When the Easi-Scope 2 InstallShield Wizard appears,
Click Next.
Wait for installation to be completed and then click
―Finish‖ to close the Easi-Scope 2 InstallShield Wizard.
Using your Easi-Scope 2
Charging your Easi-Scope 2
Your Easi-Scope 2 is equipped with a built-in rechargeable
battery which is charged using the mini-USB connector on the
side of your Easi-Scope 2. Fully charge the battery before your
first use.
To Charge the battery, plug-in the supplied USB cable to your
Easi-Scope 2 and to your computer. When charging your Easi-
Scope 2, the Status Indicator on your Easi-Scope 2 lights up until
the battery is fully charged.
