6) To stop the Search, press the
SCAN SRC
key again.
•
During the Search, press the
BANK BAND
key to move to
the next Band.
•
To change the Search direction rotate the Control knob
clockwise or counter clockwise.
•
The receiver will stay on an active channel according to the
Scan Timer settings in the VFO Menu. If the Scan Timer is
set to ‘5 seconds’, the receiver will continue Searching after
5 seconds even if the channel is still busy. If the Scan Timer
is set to ‘Busy’, the receiver will remain on the busy
frequency for as long as it stays busy, then resume
searching when the signal disappears.
1) Press the
E/VFO
key to select
VFO Mode.
(Note: the receiver
automatically selects the VFO
mode when it is turned on
).
2) Set the Squelch level using the
Squelch
5
or
6
keys so that the
noise just disappears.
3) Press and hold the
SCAN SRC
key for 2 seconds. The ‘SRCH’
icon will be displayed and the
receiver will Search the entire
frequency range of the receiver.
The Full Search function searches the entire scanner frequency
range for signals.
Full Search
3 4
1
2
E
N
G
L
IS
H
24
TSC-3000R
