TCB-1100
English 5
1) Put the mounting bracket on the proper location where you are going
to install.
4) Connect the power cable directly to the vehicle battery or fuse box of
the car. Be careful to make sure of the polarity of the battery first and
connect the cable.
2) Drill holes and fix mounting
bracket on the location.
3) Connect the antenna
cable plug to the standard recep-
tacle on the transceiver, which is
marked “ANT”.
(Red: Positive Pole(+), Black:
Negative Pole(-). The same col-
ors are shown on the battery
and in the fuse box of the car.)
5) Connect the power cable to the transceiver cable.
6) Mount the microphone bracket on one side of the transceiver, or near
it using two screws included.
7) Connect the microphone to the transceiver’s microphone receptacle.
Now you are ready to operate
the transceiver.
Installation
This transceiver is also designed to have the DIN size to be directly
installed into the audio compartment of your vehicle.
For this purpose, use the TTI supplied installation supporting DIN plates.
All other connections and installations are same as the above “Normal
Installation Using Mounting Bracket.”
Installing into Audio Compartment
Consider that this location of the transceiver should not interfere with the
driver and passengers. Choose a spot where the microphone and all con-
trols are easily accessible.
