TTI TSC-100R, Инструкция по эксплуатации

Страница: 13 / 64

INSTRUCTION MANUAL 13 TSC-100R/100RBT
ENGLISH
n
Full Band Search
The Full Search function searches the entire scanner frequency range for signals.
Press the
E/VFO
key to select VFO Mode.
(Note: the receiver automatically selects the
VFO mode when it is turned on).
Set the Squelch level using the Squelch p or q
keys so that the noise just disappears.
Press and hold the SCAN SRCH key for sec-
onds. The ‘SRCH’ icon will be displayed and the
receiver will Search the entire frequency range
of the receiver.
To stop the Search, press the
SCAN SRCH
key
again.
1
2
3 4
1)
)
3)
4)
During the Search, press the
BANK BAND
key to move to the next Band.
To change the Search direction rotate the Control knob clockwise or counter
clockwise.
The receiver will stay on an active channel according to the Busy Timer settings
in the VFO Menu. If the Busy Timer is set to ‘5 seconds’, the receiver will continue
Searching after 5 seconds even if the channel is still busy. If the Busy Timer is set
to ‘Busy’, the receiver remain on the busy frequency for as long as it stays busy,
then resume searching when the signal disappears.
Note:
1)
)
3)
n
Dual Watch
The Dual Watch function lets you constantly
monitor two frequencies for activity.
To set the Dual Watch function:
1) Enter one of the required frequencies using
the Control knob,
) Adjust the squelch so that the receiver is
muted.
3) Press
Func DW.
6
2
3 6
3
1 4