TTI TGA1230, Руководство пользователя, Страница: 42 / 88

Point Edit
Press the
point edit…
soft-key to call the
POINT EDIT
screen:
POINT EDIT
(addrs, value)
♦ (00512, +0500)
◊
◊
exit next point
◊
To modify a point, press the
addrs
soft-key and enter the address directly from the keyboard or
by using the rotary control; the current data value will be displayed to the right of the address. To
change the value press
value
and enter the new value directly from keyboard or by using the
rotary control. Changing the data value automatically updates the waveform.
Pressing the
next point
soft-key automatically advances the address by one point;
alternatively press
addrs
to re-select address and permit entries from the keyboard or by rotary
control.
Line Edit
Press the
line draw…
soft-key to call the
LINE
screen:
LINE (addrs, value)
♦ frm (00512, +0500)
◊
◊
to (00750, +0412)
◊
◊
exit draw line
◊
The display shows a
frm
(from) and
to
address which will be the points between which a
straight line will be created when the
draw line
soft-key is pressed. The default
frm
address
is the first point on the waveform or the point most recently edited if point edit has been used. Set
the “from” address and value by pressing the appropriate soft-key and making an entry direct
from the keyboard or by using the rotary control; repeat for the “to” address and value.
The line will be drawn between the two selected points when the
draw line
soft-key is
pressed.
Wave Insert
Pressing
wave insert…
calls the wave insert screen:
wv01
Æ
wv02
◊
00000 strt 00400
◊
◊
00512 stop 01000
◊
◊
exit insert
◊
Wave Insert places waveforms between programmable start and stop points. Both standard and
arbitrary waveforms can be inserted in the new waveform, with the exception of pulse, pulse-train
and sequence.
A section of an arbitrary waveform can be inserted, as defined by the left-hand
strt
(start) and
stop
addresses, e.g.
00000
and
00512
of
wv01
on the screen above. These addresses will
default to the limits set on the
limits
menu of the
MODIFY
screen, but can be reset to any
section of the whole waveform. Change the addresses by pressing the appropriate soft-key and
making entries from the keyboard or by rotary control. The destination of the selected section of
the source waveform in the new waveform is defined by the right-hand
strt
(start) and
stop
addresses. Change the addresses by pressing the appropriate soft-key and making entries from
the keyboard or by rotary control.
41