TTI TGA1230 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 88

TTI TGA1230 Скачать руководство пользователя страница 41

Return to the

MODIFY

screen by pressing

rename

(which implements the new name) or

cancel

.

Delete Waveform

Pressing the

delete…

soft-key displays a request for confirmation that the selected waveform is

to be deleted.

Delete waveform

“wv01 ”

?

◊

cancel delete

◊

Confirm deletion by pressing the

delete

soft-key

which will return the display to the

MODIFY

screen with the next arb waveform automatically selected;

cancel

aborts the deletion.

Waveforms currently being displayed cannot be deleted. Deleted waveforms cannot be
recovered.

Waveform Limits

Pressing the

limits

soft-key calls the

Limits

screen:

Limits of: wv01

♦

start adrs: 00000

◊

stop adrs: 01023

(size: 01024) done

◊

This menu is used to define the limits of a section of an arb waveform. The section of the
waveform defined in this way will be the only part output when that arb is selected.

Set the lower and upper limits with the

start adrs

and

stop adrs

soft-keys respectively;

there must be at least 4 points including the start and stop. The default limits are the first and last
points of the waveform. Confirm by pressing the

done

soft-key which returns the display to the

MODIFY

screen.

These limits will be used until new limits are defined. The whole waveform still exists; the limits
simply define the section of the waveform which is currently active.

Edit Waveform

Pressing the

edit waveform…

soft-key calls the

EDIT FUNCTIONS

menu:

EDIT FUNCTIONS:

◊

point edit…

◊

line draw…

◊

wave insert…

From this menu can be selected functions which permit the waveform to be edited point-by-point
(point edit), by drawing lines between two points (line draw) or by inserting all or part of an
existing waveform into the waveform being edited (wave insert). In addition, sections of the
waveform can be selected and their peak-to-peak level changed using wave amplitude, or
baseline changed using wave offset. Sections of the waveform can be copied into itself (block
copy) and position markers for use at Sync Out can also be defined.

Pressing the

exit

soft-key on any of these edit screens will return the display to the

EDIT

FUNCTIONS

menu.

40

«
...
39
40
41
42
43
...
»

Содержание TGA1230

























































































Отзывы:

Нет отзывов