Collegamenti
MAIN OUT
MAIN OUT è un’uscita di 50
Ω
. Per mantenere l’integrità della forma d’onda si devono usare
soltanto cavi di collegamento da 50
Ω
di alta qualità e l’estremità ricevente dovrebbe essere
terminata con un carico di 50
Ω
.
Non mettere in cortocircuito né applicare tensioni esterne a questa uscita.
AUX OUT
L’uscita AUXiliary fornisce un’uscita di impulsi a livello fisso con la stessa frequenza e simmetria
di MAIN OUT ed in grado di azionare un massimo di 4 carichi TTL standard.
EXT SWEEP, AM/FM IN
Un segnale esterno applicato all’entrata EXT SWEEP può essere selezionato per modulare o la
frequenza o l’ampiezza dell’uscita del generatore.
Non applicare tensioni esterne superiori a ± 10V.
RS232
L’interfaccia RS232 consente il controllo remoto usando il software PC420 Windows opzionale.
La presa tipo D a 9 vie sul generatore ha il seguente pin-out e dovrebbe essere collegata alla
porta seriale del PC usando un cavo a 9 vie con tutti i collegamenti effettuati.
Pin Nome
Descrizione
1 Nessun
collegamento
2
TXD
Dati trasmessi dallo strumento
3
RXD
Dati ricevuti allo strumento
4 Nessun
collegamento
5
GND
Messa a terra segnale
6 Nessun
collegamento
7 Nessun
collegamento
8 Nessun
collegamento
9 Nessun
collegamento
La messa a terra del segnale è collegata alla messa a terra di sicurezza dello strumento.
Per garantire la conformità alle leggi EMC usare solo unità di cavi schermati con connettori
schermati quando si effettua il collegamento ad altre apparecchiature.
35