36
*PRE <nrf>
Set the Parallel Poll Enable Register to the value <nrf>.
*PRE?
Report the value in the Parallel Poll Enable Register. The response is
<nr1><rmt>.
*SRE <nrf>
Sets the Service Request Enable Register to <nrf>
*SRE?
Report the value in the Service Request Enable Register. Response is
<nr1><rmt>.
*STB?
Report the value of the Status Byte. Response is <nr1><rmt>.
*WAI
Wait for Operation Complete true. This command does nothing because all
operations are sequential.
*RST
Resets the instrument to the factory default settings
−
with the exception of all
remote interface settings. See Factory Default Settings section.
TRIPRST
Attempt to clear all trip conditions.
LOCAL
Go to local.
IFLOCK
Request Instrument ‘lock’. This command requests exclusive access control
of the instrument. The response is ‘1’ is successful or ‘-1’ if the lock is
unavailable either because it is already in use or the user has disabled this
interface from taking control using the web interface
IFLOCK?
Query the status of the interface ‘lock’. The return value is ‘1’ if the lock is
owned by the requesting interface instance; ‘0’ if there is no active lock or ‘-1’
if the lock is unavailable either because it is in use by another interface or the
user has disabled the interface from taking control via the web interface.
IFUNLOCK
Release the ‘lock’ if possible. Returns ‘0’ if successful. If this command is
unsuccessful ‘-1’ is returned, 200 is placed in the Execution Error Register and
bit 4 of the Event Status Register is set indicating that you do not have the
authority to release the lock.
EER?
Query and clear the Execution Error Register. The response format is
<nr1><rmt>. See Error Reporting section for details of the response.
LSR<n>?
Query and clear the Limit Status Register<n>. The response format is
<nr1><rmt>. See Status Reporting section for details of the response.
LSE<n> <nrf>
Set the Limit Status Enable Register<n> to <nrf>
LSE<n>?
Returns the value in the value in the Limit Status Enable Register<n>.
The response format is<nr1><rmt>.
QER?
Query and clear Query Error Register. The response format is <nr1><rmt>.
Miscellaneous Commands
*IDN?
Returns the instrument identification. The exact response is determined by the
instrument configuration and is of the form <NAME>,<model>, 0,
<version><rmt> where <NAME> is the manufacturer's name, <model> defines
the instrument type and <version> is the revision level of the software installed.
*TST?
The PSU has no self-test capability and the response is always 0 <rmt>.
*TRG
The PSU has no trigger capability. The command is ignored in this instrument.
ADDRESS?
Returns the bus Address. The response is <nr1><rmt>.
