10
600V CLAMP METER
AC/DC VOLTAGE AND VOLTAGE FREQUENCY (% DUTY CYCLE)
MEASUREMENT
1. Select the corresponding function
V
(AC) or
V
(DC)
2. Insert the red test lead into the positive (+) jack, and the black into the
COM
jack.
3. Connect test leads to the measured circuit.
NOTE:
•
Do not input voltage above 600V to prevent electric shock or damage.
The input impedance of each range scale is 10MΩ, this load effect in high resistance
measurement may cause error. If the input impedance is lower the than 10kΩ, the error
can be ignored (<0.1%).
•
Be cautious to avoid electric shock when measuring high voltage.
•
Please check the functions by applying a known voltage before use.
SELECT
REL/ZERO MAX/MIN HOLD/
True RMS
AC/DC CLAMP METER
NCV
400A
40A
V
V
Hz%
Hz
OFF
Ω
V
Hz
COM
CAT III 300V
CAT III 600V
Ω
V
Hz
V