TTI Buddy BX4, Руководство пользователя

Страница: 56 / 60

B u d d y B X 4
56 -
f the DV video output, No.1 and No.2 indicators
n altern
A: Th ndicato t is “Power” and “Run”. If the 2 indicators lights are
shing a the ignition signal, please check if the yellow line
the inp has connected with the power positive level, or if it’s the same as the
tting o electrical he factory default settings set
the high level effective,that is, it is ignition signal line is connecting
with the power positive level .)
Q: As apacity lim how to make the videos’ time expand to meet
A: Reduce the v ate, v ality and record by Composite Mode.
1. Set the Channel M the "Video Settings" menu to Composite Record (see 3.5);
2, Enter the "Video Parameters r video quality, while reduce
frame frames / sec or less. Generally, it can expand the recording time to 4 to 10
es lon ore by using the hod.
. Q: when using the DVR, ScreenTip appears "read only error ".
ase check if the SD card is write-protected, if so, please move the picks to the non -
o
Q: W what is low le
A: Ge two electrical l he car, the power and the ground.
tomot V el, not the specific
voltage value. Ground of Vehicle is the referen ry negative electrode.
We generally call it low level. For cars with ne ain switch cut off the
nnectio d car cha round), the chassis ground connects to the
ttery anode through a certain resistance, the chassis ground is not a reference ground
nymore. Please see the Appendix in the back, including the potential analysis diagram against
cars with negative switch control.
5. Q: Respectively, what’s the voltage reference range of the high and low level in
the DVR?
A: The voltage range of low level is DC 0V~3V, the high level is DC6V~32V.
6. Q: Why doesn't the DVR remote control work?
A: Please make sure the battery in the remote control is still good, or try to change a new
battery. And make sure aiming the remote control at infrared receptor window on the front
panel of DVR.
7. Q: SD cards or hard drives are OK, but the video recording doesn't work, what
should I do?
A: Please make sure if the default setting of Record Mode is changed from "Automatic" to"
Off ", and whether to modify the DVR to scheduled record mode and the current time is not
within the time period you set.
10. Trouble Shooting.
1. Q : A
lights o ter connecting
panel flashing
R power, no
ately.
e No.1 and No.2 i r ligh
fla lternatively, the DVR missed
of ut power lines
se f the effective level in menu settings. (T
effective when the yellow
2. SD cards’ c ited,
the requirements of the customers?
ideo frame r
ode in
ideo qu
settings" menu, select a lowe
the rate to 12
tim ger or m above met
3
A: Ple
write pr tected.
4. hat is a high level, vel?
nerally, there are evels in t
Au ive power voltage with 12V and 24 , we generally call it high lev
ce level, accurately is batte
gative switch control (the m
co n of the battery cathode an ssis g
ba
a