Tsunami Slider D400S, Руководство пользователя

Страница: 105 / 182

Drivers & Utilities
Windows XP 4 - 11
4
Windows XP
This section covers driver and utility installation in-
structions for
Windows XP .
New Hardware Found
If you see the message “ New Hardware Found ”
( Found New Hardware Wizard) for the Univer-
sal Serial Bus (USB) Controller during the instal-
lation procedure, click Cancel to close the window,
and follow the installation procedure as directed. At
the end of the installation procedure, install Service
Pack 1 for
USB 2.0 support.
Driver Installation and Multi Language Options
Make sure you have not enabled any of the Multi lan-
guage options in the
Regional and Language Op-
tions control panel before installing the drivers. Some
of these language options will interfere with the driver
installation process for the Audio driver. After you
have installed all the drivers you may then configure
the language options.
Windows XP Service Pack 1
Make sure that you install Windows XP Service
Pack 1 after installing all the drivers (if your Win-
dows XP version includes Service Pack 1 you can
skip this step).
Wireless Module ON/OFF Switch
While installing the drivers make sure that the
Wireless Module ON/OFF switch is turned OFF
,
until you come to install the drivers for the 802.11b
Wireless LAN or Bluetooth modules.
Before install-
ing the 802.11b Wireless LAN or Bluetooth drivers
turn the switch ON.
If you have both the 802.11b
Wireless LAN and Bluetooth modules, use the Fn +
F12 key combination to toggle the power to the mod-
ule(s). See “Wireless LAN & Bluetooth Modules”
on page 7 - 2 for more information. If the Found New
Hardware Wizard appears at any time (other than
outlined in the driver install procedure), click Cancel .