4CH(2CH) ENCORDER COUNTER <<ER4C-04, ER2C-04>>
User's Manual
1. Specification
1) Power Supply
AC100V-220V 50/60Hz
2) Power Consumption 100VA maximam
3) Backup
Memory backup by internal batteries during Power off state.
(more than 5 years)
4) Counter
32bit
10 decimal digit (-2147483648 ~ 2147483647)
5) Preset
Data of LCD indicator are set as present data by Preset SW.
Data are also set by LAN Comunication Command.
6) Z-phase Counter
Clear counter by Z-phase signal input.
Clear
Each channel, can set by LAN communication commands.
7)
Scaling
Can use scaling function (significant figures:15)
Scaled value = (pulse-count + offset)×multiplier
parameter (they are set by LAN communication commands.)
・offset
0~±2147483647 (initial data:0)
・multiplier
±0.000001 ~ 999.999999 (initial data:1)
8) Terminator
Can selecct using terminator(120Ω) or not,
when Encorder is Line Driver type.
9) Indicator
±7digit×4CH(2CH) (-99999999)
10) Encoder Type
A-phase and B-phase type of line driver or open collector output
11) Interface
LAN (10/100BASE-T)
12) Case Size
(H)88 (W)482.6 (D)324.5
1