3
2. Coupling
Align and bore the boss portion while clamping it in place.
3.
Re-assembly and Minimum Torque Resetting
Re-assembly
⚫
Re-assemble SHOCK GUARD by reversing the disassembly procedure.
⚫
Then grease the drive balls and Thrust bearing.
⚫
Confirm that the direction
ｓ
of the dish springs are correct.
MIN Torque Resetting
TGB20 --- TGB50
Tighten the adjustment nut and set the indicator at zero.
TGB70 --- TGB130
⚫
Tighten the adjustment nut before fitting the adjustment bolts.
⚫
Match the hub with its marking.
⚫
Fix the hub with hexagon screws (lock screw for TGB70).
⚫
Set the indicator at minimum or zero by tightening the three adjustment bolts.
