Graph 1 (Torque curve)
③
Prevent rotation of an adjustment nut, after torque setting.
Prevent rotation by setting attached clip between an adjustment nut and a stop collar, as following
figure.
Be sure to check that the projection of a clip is contained in the slot (both sides) on the Hub.
It becomes a prevention of rotation because a clip hits the stop button (convex part) of an adjustment
nut.
Fig.
5
１．
If water, oil, etc. adhere to a friction face, strange torque occurs and can not apply stabilized torque.
２．
The circumference temperature of MK is based on 35 degree or
less.
When you exceed this temperature, please consult to our company.
３．
The use range is determined by the relation between slip torque and number of rotation.
Graph 2 (Relation of torque and rotational speed)
―
3
―
