Tsubaki BDTM201, Руководство по эксплуатации

Страница: 10 / 14

6. How to input the data
6-1. How to input the unit
mass （ Refer to the unit
mass tables on next page ）
●
●
●
Timing belt & （ Reference ） Flat timing belt
To input the unit mass is width （ mm ） ×
length （ m ） in g/mm width × m Length.
1.Data capacity is 000.1 〜 999.9g/mm
width × m Length
2.Able to input with four significant digit
figures of three columns of integers and
decimal one column
Tooth belt from the pre-install data
Push "MASS" bottom more than one
second, belt type shows up on the screen.
With using "UP" or "DOWN" button to
select and push "MEASURE" to set.
（ Reference ） V belt, V-Ribbed belt, and Wire
Input the mass per meter of length in "g/m
length" for unit mass.
Able to input by four significant digits,
i.e. three digits of integer and one digit
below decimal point from 000.1 up to
999.9 g/m L. Unit mass corresponds to one
piece for V-belt and wire, and one rib for
V-ribbed belt.
6-2. How to input the belt
width or the number of
belts （ ribs ）
●
●
Timing belt & （ Reference ） Flat timing belt
To put the date is for belt width is
000.1mm
〜
999.9mm, three digits of
integer and one digit below decimal point
in mm.
（ Reference ） V belt, V-Ribbed belt, and Wire
For V belt and Wire, put one piece. For V
ribbed belt, put the number of ribs of
V-ribbed belt.
6-3. How to put the value of
span length
Span length is a distance between contacts
with pulley, and can be calculated by the f
following calculating formula.
Alternatively, measure the distance between
pulley contacts with a tape measure and put.
L ： Span length （ mm ）
C ： Distance between axes （ mm ）
Dp ： Large pulley pitch outer diameter （ mm ）
dp ： Small pulley pitch outer diameter （ mm ）
L＝ C − （Dp−dp）
4
2
2
Flat timing
belt
V-Ribbed belt
V belt
Wire
g/mm W ×mL
g/Ribbed ×mL
g/one belt ×mL
g/one belt ×mL
mm
Number of
Ribbed
1
1
mm
mm
mm
mm
MASS WIDTH SPAN
9 10
Refer to the explanation of "MASS" button at page 6.
7. Unit mass table of the preinstalled belt
■
Table2: For BDTM201 unit mass table
Data of unit mass can be input by four significant digits, i.e. three digits of integer and one digit
below decimal point in g/mm W x m L from 0.1 to 999.9 g/mm W x m L.
8. Unit mass table of TSUBAKI tooth shape timing belt
■
Table1: Unit mass list of timing belts