TSL PAM1 MK2, Руководство по эксплуатации

Страница: 31 / 62

P a g e | 31
PAM1 MK2 User Handbook Issue 1
Seven International scales are supported by PAM1, they are as follows:
EBU Digital (IEC 60268)
BBC PPM (IEC IIa)
EBU PPM (IEC IIb)
Nordic (IEC I)
DIN PPM
Standard VU
2.14.3 Reference and Peak Level Selection
The dBFs parameter can be used to alter the 0dB reference level from between -12 and -24
dBFs. The Zero parameter selects the offset level between the Zero dBFs setting and the onset of
Peak indication (the point where the bargraph changes colour to red).
2.14.4 Block Colour Mode Selection
When set to Block mode, the Peak parameter enables the user to choose to illuminate the
indication between zero dBFs and the peak level in yellow.
2.14.5
Hold
The Hold parameter activates a peak hold indication when switched on.
2.14.6
Dolby E Video Delay
The PAM1 features a 1 frame (40 ms) video delay setting which can be inserted into the
Downconverted video display to compensate for the latency caused by decoding a Dolby E signal.
If selected and activated, the delay will be switched into the video signal path automatically when
a Dolby E input signal is detected and decoded. The Video Confidence window on PAM1 MK2 will
be subject to a 1 frame delay when the video delay mode is active.