Page
35
of
41
Using the PAM1-IP-3G and PAM2-IP-3G to Monitor
Dante/AES67 AoIP
In order to use the PAM1-IP-3G or PAM2-IP-3G within a Dante/AES67 network, you will need to make use
of Audinate’s Dante Controller.
Dante Controller can be downloaded from Audinate’s Website using the following l
ink:
https://audinate.com/products/software/dante-controller
If you are connecting your PAM1-IP-3G or PAM2-IP-3G to a non-redundant network, please make sure to
connect the Primary port only.
If you are connecting your PAM1-IP-3G or PAM2-IP-3G to a redundant network, then both Primary and
Secondary ports should be used.
Note:
When connecting your PAM1-IP-3G or PAM2-IP-3G to a redundant Dante network, please ensure that both Primary and Secondary
ports are connected using the same link speed. If the primary interface is connected to a 1 Gbps switch port, the secondary interface must
also be connected to a 1 Gbps switch port.
Содержание PAM1-IP-3G
Страница 34: ...Page 34 of 41 PAGE INTENTIONALLY LEFT BLANK...
