TSL MDU12-PMi, Руководство пользователя

Страница: 10 / 29

MDU12-PMi Manual 10 Issue 4
3.0 Introduction
The unit presents three control interfaces; web interface (http), SNMP interface, and the serial port on the rear
of the unit.
The default IP address from the factory is 192.168.100.235, with a subnet mask of 255.255.255.0. The serial
port interface can be used to set a new IP configuration and also to set a user name and password (needed to
access the web pages). The power must be cycled after this operation for changes to take effect.
Refer to section 5 p15 for initial configuration settings.
4.0 Operation
Upon connecting the unit to power it will go through a quick boot up procedure with normally the LEDs going
from Red to Amber to Green.
The following login screen will be seen. The unit is now on-line.
The default IP address is 192.168.100.235
The Username is <<root>>
The Password is <<telsys>>