TSindustrie GM10 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 80

TSindustrie GM10 Скачать руководство пользователя страница 32

29/07/2020 32

Blockages

The cover may only be opened and stuck pieces of
wood removed with a suitable tool in the event of
blockages around the retraction channel when
the great disc has come to a standstill and the
drive motor switched off. The hacking disc must
be locked in position! You must make sure that
the cover cannot close independently. Before o-
pening the cover, the blowout pipe must be lo-
cked in a direction away from the cover. Close the
side cladding and the cover tight again after
addressing the blockage

.

Transport position

First of all, the switch bracket is brought into the
"halt" end position. With the safety lock beneath
the funnel flap, the switch rod is automatically
blocked on the "halt" position by turning the sa-
fety shaft by approx. 45°. Turn the blowout pipe
to the back in the transport position.

Cleaning the machine

The machine is to be cleaned after finishing work
each day. The side cover on the wood shredder
must be folded up for this. Loose chips and little
twigs are to be removed and blade slits on the
hacking disc must be cleaned. The hacking disc
must be locked. This preserves the machine and
increases the service life.

«
...
30
31
32
33
34
...
»

Содержание GM10

















































































Отзывы:

Нет отзывов