Operating QUESTempº 34 & 36
11
Flow
: On, Off .
Index
: none, ACGIH, Navy, EPRI and select either: WBGTi (indoor), WBGTo
(outdoor) for Index setting.
Index Settings
Explanation
TLV and action limit
These index settings only apply to the ACGIH Index.
EPRI and Navy will ignore this setting.
Clothing Correction
Parameters are set from 0 - 9.9
C. This is a clothing
correction for the WBGT in degrees Celsius and is
applied to the selected WBGT when the work duration
is calculated. (It will not affect the WBGT as displayed
by the unit.) This value should typically be set to 0.0 for
the Navy. (The field is noted as “Clo Corr”.)
3.
Press the
I/O Enter
key to change a parameter. Time and date require using the
Up/Down
Arrows
and
I/O Enter
keys to modify each number.
NOTE:
At any time, you can move back one level, by pressing the
Run/Stop
key.
4.
Exit Setup by pressing the
Run/Stop
key.
QTº34/36 allows printing to a parallel or serial printer or to a computer. The QUESTempº 36 will
recognize the cable plugged in and configure itself for serial or parallel. If no cable is plugged in,
it will default to serial. Press
I/O Enter
key to begin printing. Press
Run/Stop
key to return to
the menu.
NOTE:
If you want to stop the printing, press I/O enter key until you return to the main menu.
When the printer has stopped printing, remove the cable from the printer to the
instrument.
Reset
Resetting enables you to clear the logged data from memory. Press the
I/O Enter key
to enter
the
Reset mode
. Clear the memory by holding down the
I/O Enter key
while the display counts
down from three.
