6
Chapter 3
Menus
DISPLAY SETUP
Display setup menu is where you will setup the desired parameters to be
displayed on the running screen. With a parameter highlighted you can then
use the
ON
soft key to have it show up on the running screen or select the
OFF
soft key to turn off the parameter. Use PRIMARY soft key to have a
parameter show up on the running screen in a larger display. Only one
parameter can be selected as a primary, and up to 2 secondary parameters
can be selected at one time.
SETTINGS
Settings menu is where you can set the general settings. These include
Language, Beeper, Select Units, Time Constant, Contrast, Set Time, Set
Date, Time Format, Date Format, Number Format, Backlight and Auto Off.
Use the
g
or
h
soft keys to scroll through the settings for each option and
use the
key to accept settings.
FLOW SET UP
In Flow Setup mode, there are 3 types: Round Duct, Rectangle Duct and
Duct Area. Use the
g
or
h
soft keys to scroll through the types and then
press the
key to accept the desired type. To change the value, highlight the
Enter Settings option and press the
key.
DATA LOGGING
Measurements
Measurements to be logged are independent of measurements on the
display, and must therefore be selected under DATA LOGGING
Æ
Measurements.
Log Mode/Log Settings
You can set Log Mode to Manual or Auto-save.
•
Manual mode does not automatically save data, but instead prompts
the user to save a sample.
•
In Auto-save mode, the user manually takes samples that are
automatically logged.
•
In Cont-key mode, the user starts taking readings and logging by
pressing the
key. The instrument will continue taking
measurements until the
key is pressed again.